Ho sebelisoa ha aluminium die casting ka koloing

Lilemong tse mashome a mabeli tse fetileng, indasteri ea likoloi ea lefats'e ts'ebeliso ealihlahisoa tsa aluminiumli ntse li eketseha, ho ea ka lipalo-palo, tlhahiso ea lefats'e ea aluminium e eketseha ka ho feta 3% selemo le selemo, tlhahiso ea aluminium castings, 60% - 70% ea aluminium e sebelisoang ho etsa likoloi, linaheng tse tsoetseng pele indastering ea likoloi, ho lahla aluminium ea likoloie ikarabella bakeng sa boholo ba tlhahiso ea mefuta e fapaneng ea li-castings tsa aluminium, joalo ka Japane, 77% ea li-castings tsa aluminium ke likoloi tsa likoloi.

Melemo e tlisoang ke keketseho ea palo ea aluminium ea likoloi e bonahala haholo maemong a latelang:

1.Khothaletsa koloi e bobebe, ho boloka matla le phokotso ea tšebeliso, le ts'ireletso ea tikoloho

Phokotso ea 10% boima ba koloi ea 1300kg e ka fokotsa tšebeliso ea mafura ka 8%, kapa 0.7kg ea peterole bakeng sa 100km e 'ngoe le e 'ngoe e tsamaeang.

2. Likarolo tsa motsoako oa aluminium li ka sebelisoa hape ho boloka matla

Hangata sekhahla sa ho hlaphoheloa ha aluminium alloy ha se ka tlase ho 85%, 60% ea motsoako oa likoloi oa aluminium o tsoa ho tsosolosoa ha lisebelisoa tsa litšila, ho fihlela ka 2010, boleng bona bo nyolohetse ho hoo e ka bang 95%.

3.Eketsa khanyetso ea kutu le ho lelefatsa bophelo ba tšebeletso

Filimi e teteaneng ea oxide e ka thehoa holim'a aluminium 'me ho hanyetsa ha eona ha kutu le khanyetso ea oxidation e phahame haholo ho feta ea lisebelisoa tsa tšepe. Ka nako e ts'oanang, motsoako oa aluminium o na le ts'ebetso e ntle ea kalafo ea holim'a metsi, e loketseng bakeng sa 'mala oa oxidation, ho fafatsa phofo, pente le mekhoa e meng ea kalafo ea holim'a metsi.

4.E thusa ho ntlafatsa botsitso le polokeho ea ho khanna koloi

Ho sebelisa motsoako oa aluminium ho ka etsa hore ho sisinyeha ha lebili ho fokotsehe, ho ka sebelisang li-buffers tse bobebe, ho phaella moo, ka lebaka la tšebeliso ea lisebelisoa tsa aluminium alloy ke tabeng ea ho se fokotse molumo oa koloi ho fokotsa boima ba koloi, kahoo etsa hore koloi e be e tsitsitseng haholoanyane, ha e otloa ke aluminium motsoako oa motsoako o ka monya le ho qhalakanya matla a mangata, 'me kahoo a bolokehe le ho phutholoha haholoanyane.

Tšebeliso e tloaelehileng ea aluminium alloy die casting ka koloing

Sekhetla sa phetisetso ea koloi ea bapalami ea theknoloji e phahameng e hlahisoang ke aluminium ea khatello e tlase e na le mefuta e 'meli ea likoloi tsa 2013 ka lihlopha.

Aluminium ea khatello e phahameng shoa likarolo, e nang le thepa e ntle ea mochine

Aluminium die casting e na le ts'ebetso e ntle haholo ea ho fokotsa boima ba 'mele:

SEHLOOHO: -7.6KG

SEHLABAKA:-2.4KG

LIHLOOHO: -23.7KG

Sekoaelo sa kutu: -6.2KG

MARULELO:-4.2KG

SEBOPEHO LE SENG:-96KG