HAL.MIM sintering
Habka qaabaynta duritaanka birta inta badan waxaa ka mid ah naqshadeynta alaabta, naqshadeynta caaryada, tijaabinta tayada, isku dhafka, naqshadeynta, hoos u dhigista, sintering, processing secondary iyo 8 kale oo muhiim ah, JH MIM waxaa loo habeyn karaa qalabka wax lagu dhimo iyo qalabaynta iyadoo loo eegayo badeecada macaamiisha iyo shuruudaha nidaamka, waxaana lagu dari karaa si wadajir ah si ay u bixiyaan nadiifinta vacuum iyo sintering qalab isku dhafan.
1, graphite thermal field vacuum degreasing sintering qalab isku dhafan;
Qalabka ku habboon:
Iron nikkel alloy, birta ugu badan (17-4ph, 316L, PANACEA, iwm), birta dhiman, birta xawaaraha sare leh, iwm
Jiehuang MIM waxay bixisaa xalalka soo socda ee birta-nickel Alloys-ka, ahama (17-4ph, 316L, PANACEA, iwm), birta dhiman, birta xawaaraha sare, iwm.
| Aqoonsiga | VHS4415 |
| Nambarka modelka | VHSgr-40/40/150-1600 |
| Muddada shaqada ee waxtarka leh (mm) | 400×400×1500(mm) |
| Miisaanka qaadista | 300KG |
| Awoodda kuleylinta/wadarta guud | 240KW/280KW |
| Heerkulka naqshadeynta | 1600 ℃ |
| Heerkulka shaqada | 1550 ℃ |
| Habka xakamaynta heerkulka | Laba heerkul xakameyn |
| Labbiska heerkulka sare | ≤±3℃ |
| Heerka kululaynta | 15 ℃/daqiiqo (≤1000℃) ; 10 ℃/daqiiqo (1000-1550 ℃) |
| Xakamaynta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa |
| Heerka daadinta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa/saacaddii |
| Wax soo saarka | ≥98﹪ |
| Heerka qaboojinta (foornada buuxa)
(Qaboojinta heerkulka gelitaanka biyaha ≤30 ℃, cadaadiska foornada 9bar) | 1450 ilaa 100 darajo, 5 ilaa 7 saacadood |
2, birta kuleyl beer vacuum xaalufinta sintering qalab isku dhafan;
Qalab ku habboon
Kaarboon-yar-yar oo bir ah, alloy titanium (Ti, TC4), daawaha copper, daawaha tungsten, superalloy (718, 713), iwm
Jiehuang MIM waa qalab taxane ah: birta-kaarboon-yar-yar, alloy titanium (Ti, TC4), daawaha copper, daawaha tungsten, superalloy (718, 713), iwm Waxaan ku siin xalalka soo socda:
| Nambarka modelka | VHS4412-M |
| Nambarka modelka | VHSmo-42/45/125-1600 |
| Muddada shaqada ee waxtarka leh (mm) | 420×450×1250(mm) |
| Miisaanka qaadista | 300KG |
| Awoodda kuleylinta/wadarta guud | 240KW/280KW |
| Heerkulka naqshadeynta | 1600 ℃ |
| Heerkulka shaqada | 1550 ℃ |
| Habka xakamaynta heerkulka | Laba heerkul xakameyn |
| Labbiska heerkulka sare | ≤±3℃ |
| Heerka kululaynta | 15 ℃/daqiiqo (≤1000℃) ; |
| Xakamaynta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa |
| Heerka daadinta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa/saacaddii |
| Wax soo saarka | ≥98﹪ |
| Heerka qaboojinta (foornada buuxa)
(Qaboojinta heerkulka gelitaanka biyaha ≤30 ℃, cadaadiska foornada 9bar) | 1450 ilaa 100 darajo, 8 ilaa 10 saacadood |
LABA, cadaadiska MIM hoos u dhigaya sintering
Geedi socodka socodka iyo hordhaca
Iyada oo la hiigsanayo khasaaraha cufnaanta hoose ee alaabta habka sintering vacuum, foornada isku dhafan ee hoos u dhigista cadaadiska ayaa la sameeyay, taas oo kordhin karta cufnaanta alaabta heerkulka sare iyada oo loo marayo cadaadiska gaaska sare.
1, 1MPa graphite thermal field vacuum cadaadiska hoos u dhigaya sintering qalab isku dhafan;
Qalabka ku habboon:
Carbid Tungsten, carbide titanium, carbide tantalum, iwm.
Jiehuang MIM1MPa cadaadiska hoos u dhigaya sifooyinka sintering:
| Aqoonsiga | PHS4412-1 |
| Nambarka modelka | PHSgr-40/40/120-1600 |
| Muddada shaqada ee waxtarka leh (mm) | 400×400×1200(mm) |
| Miisaanka qaadista | 600KG |
| Awoodda kuleylinta/wadarta guud | 240KW/280KW |
| Cadaadiska naqshadeynta | 1MPa |
| Cadaadiska shaqada | 0.96MPa |
| Heerkulka naqshadeynta | 1600 ℃ |
| Heerkulka shaqada | 1550 ℃ |
| Habka xakamaynta heerkulka | Xakamaynta heerkulka saddex suunka |
| Labbiska heerkulka sare | ≤±5℃ |
| Heerka kululaynta | 15 ℃/daqiiqo (≤1000℃) ; |
| Xakamaynta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa |
| Heerka daadinta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa/saacaddii |
| Wax soo saarka | ≥98﹪ |
| Heerka qaboojinta (foornada buuxa)
(Qaboojinta heerkulka gelitaanka biyaha ≤30 ℃, cadaadiska foornada 9bar) | 1450 ilaa 100 darajo, lix ilaa sideed saacadood |
2, 6MPa graphite thermal field vacuum cadaadiska hoos u dhigaya sintering qalab isku dhafan;
Qalab ku habboon
Carbid Tungsten, carbide titanium, carbide tantalum, iwm.
Jiehuang MIM 6MPa cadaadiska hoos u dhigaya sifooyinka sintering:
| Aqoonsiga | PHS4412-6 |
| Nambarka modelka | PHSgr-40/40/120-1600 |
| Muddada shaqada ee waxtarka leh (mm) | 400×400×1200(mm) |
| Culays culus | 600KG |
| Awoodda kuleylinta/wadarta guud | 300KW/340KW |
| Cadaadiska naqshadeynta | 6MPa |
| Cadaadiska shaqada | 5.80MPa |
| Heerkulka naqshadeynta | 1600 ℃ |
| Heerkulka shaqada | 1550 ℃ |
| Habka xakamaynta heerkulka | Xakamaynta heerkulka saddex suunka |
| Labbiska heerkulka sare | ≤±5℃ |
| Heerka kululaynta | 15 ℃/daqiiqo (≤1000℃) ; |
| Xakamaynta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa |
| Heerka daadinta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa/saacaddii |
| Wax soo saarka | ≥98﹪ |
| Heerka qaboojinta (foornada buuxa)
(Qoojinta heerkulka gelitaanka biyaha ≤30 ℃, cadaadiska foornada 50bar) | 1450 ilaa 100 darajo, 6 ilaa 8 saacadood |
3, 10MPa graphite thermal field vacuum cadaadiska hoos u dhigaya sintering qalab isku dhafan;
Qalab ku habboon
Carbid Tungsten, carbide titanium, carbide tantalum, iwm.
Jiehuang MIM 10MPa cadaadiska hoos u dhigaya sifooyinka sintering:
| Aqoonsiga | PHS4412-10 |
| Nambarka modelka | PHSgr-40/40/120-1600 |
| Muddada shaqada ee waxtarka leh (mm) | 400×400×1200(mm) |
| Culays culus | 600KG |
| Awoodda kuleylinta/wadarta guud | 370KW/410KW |
| Cadaadiska naqshadeynta | 10MPa |
| Cadaadiska shaqada | 9.50MPa |
| Heerkulka naqshadeynta | 1600 ℃ |
| Heerkulka shaqada | 1550 ℃ |
| Habka xakamaynta heerkulka | Xakamaynta heerkulka saddex suunka |
| Labbiska heerkulka sare | ≤±5℃ |
| Heerka kululaynta | 15 ℃/daqiiqo (≤1000℃) ; |
| Xakamaynta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa |
| Heerka daadinta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa/saacaddii |
| Wax soo saarka | ≥98﹪ |
| Heerka qaboojinta (foornada buuxa)
(Qoojinta heerkulka gelitaanka biyaha ≤30 ℃, cadaadiska foornada 50bar) | 1450 ilaa 100 darajo, 5 ilaa 7 saacadood |
SADDEX, CIM cadaadiska atmospheric sintering
Qalab isku dhafan
Habka duritaanka dhoobadaInta badan waxaa ka mid ah naqshadeynta alaabta, naqshadeynta caaryada, tijaabinta tayada, isku dhafka, samaynta, hoos u dhigista, sintering, processing secondary iyo 8 kale oo muhiim ah, Jiehuang MIMwaxay habayn kartaa dereasing iyo sintering qalabka iyadoo la raacayo alaabta macaamiisha 'iyo shuruudaha nidaamka, iyo waa la isku dari karaa si ay u bixiyaan vacuum dereasing iyo sintering qalab isku dhafan.
Qalab ku habboon
Zirconia, alumina, silicon nitride, silicon carbide, iwm.;
Xalka Jiehuang CIM waa sida soo socota:
Tilmaamaha ugu muhiimsan waa sida soo socota:
- Alaabooyinka leh qaababka joomatari ee adag waxaa loo diyaarin karaa si xor ah oo toos ah.
- Wareegga samaynta waa gaaban yahay, kaliya tobanaan boqol oo ka mid ah shubista iyo cadaadiska kulul ee wakhtiga dhejinta, xoogga billet waa sarreeyaa, wax soo saarka ayaa si toos ah loo samayn karaa, iyo maamulka iyo xakamaynta habka wax soo saarka ayaa sidoo kale ku habboon, ku habboon wax soo saarka ballaaran.
- Dheecaannada wanaagsan ee binder-ka awgeed, cufnaanta biilka wax-ku-habaynta duritaanka waa mid la mid ah.
- Sababtoo ah ku-darka xirmooyinka badan ee qaabeynta duritaanka, wakhtiga dhimista ayaa dheer, gaar ahaan alaabooyinka leh dhumuc weyn, wakhtiga dhimista waxay noqon kartaa ilaa 100-200 saacadood.
- Sababtoo ah budada iyo isku-darka isku-dhafka ah waa mid aad u lebbisan, farqiga u dhexeeya budada waa mid aad u yar, iyo sifooyinka hoos u dhigista ee habka sinnaanta ayaa asal ahaan isku mid ah, sidaas darteed alaabtu waxay leedahay cufnaanta isku midka ah ee dhammaan qaybaha iyo saxnaanta joomatari sare.
- Cabbirka aagga waxtarka leh: 400X400X1500mm
- Isku mid ahaanshaha heerkulka: ± 3℃
| Aqoonsiga | VHS4415 |
| Nambarka modelka | VHSgr-40/40/150-1800 |
| Muddada shaqada ee waxtarka leh (mm) | 450×450×1500(mm) |
| Miisaanka qaadista | 300KG |
| Awoodda kuleylinta/wadarta guud | 240KW/280KW |
| Heerkulka naqshadeynta | 1800 ℃ |
| Heerkulka shaqada | 1750 ℃ |
| Habka xakamaynta heerkulka | 2 aag |
| Labbiska heerkulka sare | ≤±3℃ |
| Heerka kululaynta | 15 ℃/daqiiqo (≤1000℃) ; 10 ℃/daqiiqo (1000-1550 ℃) |
| Xakamaynta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa |
| Heerka daadinta vacuum | Qabow, madhan, foorno nadiif ah, ≤ 2Pa/saacaddii |
| Wax soo saarka | ≥98﹪ |
| Heerka qaboojinta (foornada buuxa)
(Qaboojinta heerkulka gelitaanka biyaha ≤30 ℃, cadaadiska foornada 9bar) | 1450 ilaa 100 darajo, 5 ilaa 7 saacadood |
Waqtiga boostada: Dec-06-2023