When considering the use of micro metal injection molding process, metal injection molding manufacturer can measure it from the following aspects.
The first is the complexity of the product.
MIM Metal injection molding process is the same as plastic injection molding to achieve complex parts of flexible design.Parts that require multiple parts for assembly can be designed into a single mim injection parts , complex parts that cannot be manufactured by other processes, and complex parts that require multiple machining processes to complete.
The second is weight and size.
The weight of the pmetal injection molding parts ranges from 0.1 to 250 grams, and 50 grams is the most economical weight.0.01 g of product can now be produced.
Because of the price of raw powder, the cost of products larger than 100 grams may rise.Wall thickness of 2 to 6 mm is most suitable for mim manufacturing process.
The third is production.
Ten thousand to two million is the most suitable and economical quantity, the larger the quantity, the more it can reflect the cost advantage.However, considering the cost of mold and development input, if the product quantity is too small and the cost is Shared to the product, the unit price will be difficult to accept.
Fourth, raw materials and performance.
Metal injection molding services can be used in a wide range of materials, from stainless steel, low alloy steel, hard alloy, high specific gravity alloy to high temperature alloy, titanium metal injection molding, ceramic powder injection molding and metal matrix composites.In terms of performance, materials that are close to full density and difficult to be machined, non-standard materials, good surface roughness and clearer details of structural features are all suitable for the adoption of MIM technology.
China has become the third largest automobile producer in the world.With the vigorous development of the automobile industry, the auto parts market will also get rapid development.The international usage of metal injection molding products per vehicle is 14 kg in Europe, 16 kg in Japan and 19.5 kg in the United States.But the domestic automobile MIM product use quantity only 5kg or so.This also indicates that China’s automobile MIM parts market has great potential in the next few years.MIM enterprises should seize this opportunity to improve the level of technology to meet greater challenges.
Such as: turbo parts, regulating ring, nozzle parts, blades, seat adjustment, gearbox, gearbox, lock, sensor, airbag, safety belt regulator, ignition switch, reverse gear, moving roof parts, power steering parts and so on these products have been mass production.
Post time: Jan-07-2022