MAFITA
JIEHUANGMIM gyare-gyareyana rage ɓata lokaci yayin samar da sassauƙan sassa na ƙarfe da sauri.MIM gyare-gyaren sassaZaɓuɓɓuka masu kyau ne don aikace-aikace a cikin masana'antu daban-daban, gami da sararin samaniya, motoci, na'urori, kwamfutoci, likitanci, hakori, da kayan aiki na orthodontic. Samar da sassa masu mahimmanci tare da ma'aunin nauyi na ƙasa da gram 100 kuma girman shine gabaɗaya 0.5 ~ 20μm cikakke ne ga MIM (mim ƙarfe alluran gyare-gyaren ƙarfe),TiMIM gyare-gyare(Titanium gyare-gyare) dayumbu foda allura gyare-gyare. JIEHUANG Metal Products yanzu yana ba da samfurin samfurin MIM masu kama da 3D mai saurin juyowa don tallafawa ayyukan R&D na abokan ciniki.
MIM karfe allura gyare-gyaren Materials
Dominmim karfe allura gyare-gyaretsari, babban kewayon karfe gami ne m, An yafi amfani ga yi da kuma aiki na tsarin da na ado daidai da inji sassa da cewa ciki har da daban-daban irin Bakin karfe, titanium, da Zirconia ( yumbu allura), a ambaci 'yan. JIEHUANG MIM kwararre ne a:
1.This irin kayan hada austenitic bakin karfe kayan, kamar 316L, 304 jerin, da dai sauransu.,
2.Precipitation hardening bakin karfe jerin kamar 17-4PH, SUS631 da sauran high ƙarfi bakin karfe allura kayan;
3.SUS440 jerin martensitic tsarin bakin karfe allura kayan, ana amfani da ko'ina a kayan aiki, likita kayan aiki, agogon hardware da sauran filayen.
Game da kayan kayan ƙarfe na ku, za mu ba ku shawarwari masu sana'a bisa ga amfani da kayan ƙarfe.
Anan ga tebur ɗin da ke rarrabuwa da bayyana kayan gama gari da ake amfani da su a cikin Ƙarfe Injection Molding (MIM):
| Nau'in Material | Nau'ukan | Aikace-aikace |
|---|---|---|
| Bakin Karfe | 316L, 304L, 17-4 PH, 420, 440C | Kayan aikin tiyata, kayan aikin mota, kayan masarufi, saboda juriyar lalata da ƙarfi. |
| Ƙarfe Ƙarfe | 4605, 8620 | Aikace-aikacen motoci, injinan masana'antu, kayan aiki, don ƙarfin tsari da juriya. |
| Kayan aiki Karfe | M2, H13, D2 | Yanke kayan aikin, naushi, mutu, yana ba da babban tauri da juriya ga abrasion da nakasawa. |
| Titanium Alloys | Ti-6 Al-4V | Aerospace, likita dasa, na'urorin mota, sananne ga babban ƙarfi-zuwa nauyi rabo da lalata juriya. |
| Tungsten Alloys | Tungsten nauyi gami | Jirgin sama (ma'aunin ma'auni), likitanci (kayan aikin jiyya), don babban yawa da garkuwar radiation. |
| Cobalt Alloys | Stelite, Cobalt-Chromium | Kayan aikin likita, kayan aikin sararin samaniya, kayan aikin yanke, kyakkyawan lalacewa da juriya na lalata. |
| Garin Copper | Bronze, Brass | Masu haɗa wutar lantarki, magudanar zafi, aikace-aikacen kayan ado, sananne don ingantaccen ƙarfin wutar lantarki da thermal. |
| Alloys Magnetic Soft | Fe-Ni, Fe-Co | Abubuwan lantarki kamar solenoids, actuators, masu canza wutan lantarki, don halayensu na maganadisu. |
| Abubuwan da aka bayar na Nickel Alloys | Inconel 625, Inconel 718 | Abubuwan injinan sararin samaniya, sassan injin turbin gas, babban zafin jiki da juriya na lalata. |
Wannan tebur yana ba da ra'ayi mai tsari na nau'ikan nau'ikan kayan da aka yi amfani da su a cikin Tsarin Injection na ƙarfe, yana nuna takamaiman nau'ikan su da aikace-aikacen yau da kullun a cikin masana'antu daban-daban.
Jadawalin Hakurin Hakuri Motsin Ƙarfe
Shin ba ku da tabbacin girman da ya dace don MIM gyare-gyaren sashin ku? Tabbatar cewa kowane tsarin kayan aiki da kuka zaɓa lokacin zabar wanikarfe allura gyare-gyaren kamfaninyana ba da daidaitattun abubuwan haɗin gwiwa yadda ya kamata kuma akai-akai. Hanyar kayan aikin mu na al'ada an yi shi ne don ƙara haɓaka aikin ku da rage farashin ku.
Da fatan za a tuntube mu!
Karfe allura gyare-gyare tsari
Mataki1:Daure- tushen karfe allura gyare-gyaren tsari. A cikibakin karfe allura gyare-gyare, Mai ɗaure yana da manyan ayyuka guda biyu na haɓaka haɓakar ruwa don gyare-gyaren allura da kuma kula da siffar ɗan ƙaramin abu.
Mataki2:Fedstock- Haɗawa shine tsarin haɗa foda na ƙarfe tare da ɗaure don samun abinci iri ɗaya. Tun da yanayin kayan abinci ya ƙayyade kaddarorin na ƙarshesamfurin allura, wannan mataki na tsari yana da matukar muhimmanci. Wannan ya ƙunshi abubuwa daban-daban kamar hanya da jerin abubuwan ƙari na ɗaure da foda, yanayin haɗuwa, da halayen na'urar haɗawa.
Mataki3:Yin gyare-gyare- Ana dumama kayan abinci da allura a ƙarƙashin babban matsi a cikin rami mai ƙura, yana ba da damar ƙirƙirar sifofi masu ban mamaki. Ana kiran bangaren “bangaren kore” da zarar an cire shi.
Mataki na 4:Bayarwa-Bayan "bangaren kore" ya yi aikin sarrafawa don cire mai ɗaure, yanzu yana shirye don mataki na gaba. Ana kiran ɓangaren a matsayin "kasa-kasa" da zarar an gama aiwatar da ƙaddamarwa.
Mataki na 5:Tsayawa- shine mataki na ƙarshe a cikin tsarin MIM, sintering yana kawar da pores tsakanin sassan "launin ruwan kasa" foda. Sanya samfuran MIM su kai ga cikar ƙima ko kusa da cikar ƙima.sintering tsari a foda metallurgyyana da matukar muhimmanci.
Mataki6: Na halifoda karfe hanyarshine karfen allura gyare-gyare. Post-sintering jiyya (daidaici latsa, mirgina, extrusion, quenching, surface quenching, man nutsewa, da dai sauransu) wajibi ne don workpieces tare da high ainihin bukatun, high taurin, da kuma high lalacewa juriya.
The workpiece za a ɗan karkata a lokacin post-processing kuma yana bukatar a sake fasalin. Kayan aiki na sifa da ake da shi na ƙira ne mai sauƙi kuma yana iya aiwatarwa da siffata aikin guda ɗaya a lokaci guda, wanda ke haifar da ƙarancin ingancin aiki da ƙimar samfur. Bugu da ƙari, za a iya amfani da kayan aiki na kayan aiki kawai don kayan aiki har zuwa wani girman girman; idan girman aikin da za a yi shi ya fi girma fiye da wannan kewayon, ba za a iya amfani da shi ba. Bayan darajar, kayan aiki yana buƙatar maye gurbin kayan aiki, wanda ya kara rage yawan aikin aiki.
Mataki na 7: Ganowa ta atomatik + Dubawa da hannu na samfuran MIM PRODUCT
Sanarwa:
Abin da za a yi bayan dasawa?
Bayansintiri, ƙarin ayyuka na sakandare
JIEHUANG yana ba da matakai na biyu da yawa don haɓaka ikon sarrafawa bayan abubuwan haɗin ku ba su da kwata-kwata daga duk kayan ɗauri, gami da:
- Cooling: Sassan da aka lalata suna buƙatar sanyaya a hankali zuwa zafin jiki a cikin yanayi mai sarrafawa don hana iskar oxygen da adana kayan kayan.
- Ƙimar Girma da Tsara: Waɗannan matakai na iya inganta daidaiton ƙima da ƙara yawa/ƙarfin sassa. Girman girma yana rage bambance-bambancen girma, yayin da tsabar kudi na iya ƙara girman sashi da ƙarfi. Wasu kayan na iya buƙatar sake haɗawa bayan an haɗa su don sake fitar da barbashi.
- Jiyya na zafi: Wannan tsari na iya ƙara taurin, ƙarfi, da juriya na sassan da aka ƙera.
-
Jiyya na Sama:Machining: Ayyuka kamar zaren zare, gundura, niƙa, hakowa, juyawa, taɓawa, da ƙwanƙwasa ana iya yin su don cimma girma da fasali na ƙarshe.
- Maganin Turi: Yana inganta juriya na lalata, taurin saman, juriya, da rage porosity.
- Vacuum ko Ciwon Mai: Yana sanya ɓangarorin ƙarfe da aka ƙera su zama mai mai da kansu.
- Tsarin Tsarin Tsarin: Yana haɓaka ƙarfi, yana rage porosity, haɓaka ductility da machinability.
- Resin ko Filastik Impregnation: Inganta injina da kuma shirya saman don plating.
- Machining: Ana iya aiwatar da ayyuka kamar zaren zare, m, niƙa, hakowa, juyi, tapping, da kuma buɗa baki don cimma girma da fasali na ƙarshe.
- Nika: Ya haɗa da matakai kamar honing, lapping, da goge goge don inganta ƙarewar saman.
- Plating ko Kammala: Ana iya amfani da abubuwa daban-daban azaman gamawa, gami da nickel, zinc-chromates, Teflon, chrome, jan karfe, zinariya, da sauransu.
- Sarrafa Inganci: Yawancin sashe ana duba su don tabbatar da sun cika ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙa'idodi.
- Ƙarfafa Na biyu: Ga wasu aikace-aikace, ana iya amfani da matakai kamar matsi na isostatic mai zafi don ƙara ƙara yawan sassan MIM, mai yuwuwa har zuwa 99% na cikar ƙarfin ƙarfe.